Improve your intrusion protection for spring!

With spring approaching, it’s time to take a thorough look at your theft protection. Burglary prevention is vital for the safety of yourself and your property. Moreover, good security can contribute to a lower premium for your home insurance. But what exactly are the aspects you should pay attention to when improving your burglary protection?

Start at the beginning

It all starts with good hardware. Make sure your windows and doors have locks with the SKG quality mark. This mark indicates that the lock has been tested for burglar resistance and meets strict requirements. It is also important to look at the condition of the hardware. If the locks are outdated or damaged, it is time to have them replaced. You can hire our emergency locksmith in Dartford to repair, replace and install your locks, they can also carry out a security check for you, then you will know for sure where you stand!

We go beyond locks and hinges

Besides good hardware, there are other things to consider when improving your burglary protection. For example, consider installing lighting around your home; burglars are deterred by outdoor lights because it makes it easier for them to be seen! And installing an alarm system will also definitely boost your burglary protection, an alarm system alerts the neighbourhood at the time of a break-in. We also recommend putting a sticker on your window indicating that your home is equipped with an alarm system. The sticker alone will deter burglars, even if you don’t actually have an alarm system hanging there!

Consider camera surveillance

You can also consider using a camera system, which will help you monitor your home and property even better. A camera not only has a deterrent effect, if a burglary has occurred you also have much more evidence that you can turn in to the police. This increases the chances of catching the culprit many times over, making it more likely that you will recover your stolen property!

Security advice

It is wise to seek the advice of an expert when improving your burglary protection. For example, a locksmith can carry out a security check and help you choose the right hardware. This expert can also provide you with specialised advice on burglary prevention. Our emergency locksmith in Dartford have years of experience in giving advice and improving your burglary protection. Therefore, feel free to contact us via the website or feel free to call us via the phone number on the website!

We collaborate with: Emergency Plumber 24h, Emergency Electrician Wolverhampton, Emergency Plumber Sunderland and Emergency Plumber Derby.

The post Emergency locksmith Dartford: Improve your burglary protection before spring! appeared first on Emergency Locksmith 24h.

It is imperative that you can feel safe in your own home. If you cannot feel safe, then you will always walk around feeling unsettled. Since a burglary is not a very pleasant thing to experience, it is wise to do everything you can to ensure your safety. Installing new locks is the way to achieve this. One of the options you can currently choose from our range is a cylinder lock with reinforced bridge. If you are curious to know what a cylinder lock with reinforced bridge is and what the main advantages are that you can experience with this lock, you should read on quickly. In this article, we have listed the most important information for you.

How do burglars get in?

Although burglars can enter your home in various ways, there is currently a well-known technique among burglars called the Bulgarian method. This method involves the use of core pulling. Core pooling allows the burglar to get inside quickly. They do this by using a screwdriver and a screw. They then turn this screw into the cylinder. On the screw, the burglar places a cylinder puller, with which he can apply so much force that the cylinder breaks out of the slot. With a construction key, the lock is then easy to open. In this way, a burglar can enter your home within minutes. Not what you want, of course.

Meet the cylinder lock with reinforced bridge

By choosing a cylinder lock with reinforced bridge, it is actually impossible for burglars to get in easily. The strong bridge makes it impossible to break it off. Because the lock cannot be broken off just like that, you are provided with the necessary protection. Besides the fact that a cylinder lock with reinforced bridge prevents you from pulling out the cylinder so quickly, this lock also prevents the door from being forced open.

What is core pull security?

You can also decide to install special security hardware with core pull security. By fixing the cylinder, it is completely shielded by the metal core, making pulling impossible. Anti-niche hardware protects not only the cylinder, but the entire lock. This also makes the use of the Bulgarian method, where the burglar uses pliers to break open the cylinder, a thing of the past. For more information regarding the possibilities Emergency locksmith Watford offer, it is of course always possible to contact us. We will be happy to tell you more about exactly what is possible.

Regardless of the type of lock you have fitted, it is always necessary to decide a good locksmith. Only a good locksmith will be able to fit the lock correctly. If you go to work yourself without any experience, chances are you will not achieve the security you had in mind, even if you choose a cylinder lock with a reinforced bridge. So you really would be wise to get in touch with us to find out more about the various types of options.

The importance of a cylinder lock with reinforced bridge

We hope this information has given you a better idea of how to install a cylinder lock with reinforced spring for your home. With the help of a cylinder lock with reinforced bridge, you too can ensure the best possible security for your home. This will make it a lot more difficult for burglars to get in just like that. From now on, you can go to bed knowing that you are always safe.

If you have any questions about installing a cylinder lock with reinforced bridge in your home, you can always contact the Emergency Locksmith Watford. Thanks to the quick answers from us, you can be sure that you will be helped in no time. Call us!

We collaborate with: Emergency Plumber Wolverhampton, Emergency Electrician Stoke-on-Trent, Emergency Plumber Stafford and Emergency Plumber Luton. 

The post Emergency locksmith Watford – Looking for a cylinder lock with reinforced bridge? appeared first on Emergency Locksmith 24h.

You want a new front or back door, or you want to have your old locks replaced with new ones. What kind of lock will you choose? A multipoint lock? What exactly is it? And why would you decide it? In this blog, we will explain what a multipoint lock is and in which situations such a lock is a good choice for you.

What is a multipoint lock?

A multipoint lock is a cylinder lock that allows a door to be locked at several points at the same time. A ‘normal’ lock locks at one point in the door. Pushing up the latch or turning the key locks the door at many points at once.

A multipoint lock can be used on front and back doors of houses. The multipoint lock is milled into the entire length of the door. If a multipoint lock is fitted with an SKG cylinder lock, it offers even more security. To install one, you need a professional locksmith from Emergency locksmith in Romford

How does a multipoint lock work?

A multipoint lock works with one lock, but closes the door at three to seven points in one action. This is done either by pushing the latch up or by turning the key in the lock. In the first case, the latch uses locking hooks, in the second case, the key. With a multipoint locking system, the door is locked by locking hooks into a specially milled locking bowl in the door frame. This makes it practically impossible to force the door and requires the help of a professional from Emergency locksmith in Romford.

What types of multipoint locks are there?

There are two types of multipoint locks. The lock is fitted in the same way and works mechanically in the same way, only the control is different.

Lever-operated multipoint locking

With a crank-operated multipoint lock, you use the handle (or latch) to control the lock. Pushing the latch up will bring out the hooks in the door, which then hook into the frame. Such a door is often used as a back door, because there it is convenient if you can close the door smoothly from the inside as well as from the outside.

Key-operated multipoint locking

The key-operated multipoint locking is typically used in front doors. Here, you use a key to move the multipoint lock and hook the hooks into the frame.

Why choose a multipoint lock?

A multipoint lock locks in several places in the door frame and is therefore virtually impossible to force. However, it is important to fit the multipoint lock with a Pre-approved lock. This profile cylinder has permutation pins which makes piercing very difficult, if not impossible. If you then fit a core pull device and security hardware over the cylinder, your door is really maximally secured.

Another advantage of a multipoint lock is that a slightly warped door is automatically straightened when closing. As a result, the door closes properly, and you suffer less or no draft and noise.

Advantages of multipoint locking

• Maximum security against burglars.
• Operable with 1 key
• One lock, so your door is not marred by multiple locks
• Only one lock to operate, so you don’t ‘forget’ other locks
• Multipoint locks are recommended by insurers.

Disadvantages of a multipoint lock

The biggest advantage of a multipoint lock is at the same time its biggest disadvantage: that all locking points are operated with one key. A burglar only needs to manipulate or force one cylinder to open the door. This is why we already stated that it is significant to accompany the installation of a multipoint lock with the installation of an SKG lock, approved security hardware, preferably with cylinder pull protection.

Disadvantage of the multipoint lock that is not controlled via the latch but by the key: if the lock turns stiffly, it can cause the key to break.

Maintenance of a multipoint lock

Multipoint locks need maintenance, especially if it is a key-operated lock. You want the lock to keep functioning properly to avoid having to use a lot of force to lock the door. Besides, if it is very stiff, your key may break off at some point. Lubricating the multipoint lock twice a year with a lock spray will keep it functioning optimally. Spray the agent at the latch bolt and hooks inwards. Then operate the multipoint lock a few times so that the lubricant is spread everywhere.

Installing a multipoint lock

Installing a multipoint lock is not a simple job, unless you have a prepared door and frame installed at the same time. If you want to install a multipoint lock on an existing door and frame, it is wise to have an expert do it. This is because fitting it is very delicate and requires very precise milling. The Emergency Locksmith 24h have advanced equipment for this. Via Emergency locksmith in Romford, you can quickly and easily find a skilled and experienced locksmith in Romford. Contact the Emergency Locksmith 24h now to get fast service. Call us!

We collaborate with: Emergency Plumber Wolverhampton, Emergency Plumber 24h, Emergency Plumbing London, Emergency Plumber Brighton and Emergency Electrician stoke-on-Trent.

The post Emergency locksmith in Romford: What is a multi-point lock? appeared first on Emergency Locksmith 24h.

The post 24 Hour Emergency Locksmith in Croydon appeared first on Emergency Locksmith 24h.

The post Emergency Locksmith Services St Albans appeared first on Emergency Locksmith 24h.